Professional Garage Doors and Openers Inc

Garage Door Roller Repair

Wall Mount Garage Door Opener Installation: Get a Step-By-Step Tutorial

Image Source: FreeImages

‍

Thinking about installing a wall-mounted garage door opener? It’s a great way to keep your garage organized, and the installation process is not that difficult. In this article, you’ll learn how to install a wall-mounted garage door opener. If you have an unfinished garage ceiling or living space above your garage and enough clearance for the opener to work, then you can install a wall-mounted unit. The process generally takes two to three hours. Keep in mind there are two main types of openers: chain drive and belt drive. Wall-mounted units usually use chain drives because they take up less space than belt drives; however, both can be installed in your home. If you’re interested in installing a wall-mounted opener, read on for detailed instructions and tips.

What You’ll Need

You’ll need a few tools and materials to install a wall-mounted garage door opener. Here’s a quick overview of what you’ll need: – Wall-mounted garage door opener – Level – Stud finder – Drill – Drill bits – Bolt cutters – Screwdriver – Safety glasses – Safety gloves Wall-mounted garage door openers come in different types. If you’ve purchased the unit, the manufacturer will supply all the necessary parts. Before you start installing the opener, make sure you have these items on hand: – Stud finder – Electrical tape – Wire connectors – Screwdrivers Note: You might also need a helper during the installation process.

Step 1: Mark the Location for the Opener

First, mark the location for the opener. Place the opener on the wall at the desired location, making sure the side with the chain sprocket is facing outwards. The sprocket is the part of the chain that contacts and moves the teeth of the rail. The chain sprocket must face outwards so that the chain can be replaced.

Step 2: Install the Track

Next, install the track for the opener. The track must be flush with the wall and parallel to the floor, so use a level to make sure it’s even. Use a pencil to mark the studs, and then use a drill to screw the track to the studs. The track must be attached to at least two studs to support the weight of the garage door.

Step 3: Install the Tension Spring and Hook

Install the tension spring and hook. The spring is hooked to the opener track. To adjust the tension of the spring, see instructions in the manual. The spring will lift and lower the garage door when the opener activates. Next, install the vertical rail of the opener. The rail must be parallel to the floor and flush with the edge of the garage door. Now, install the wheels on the bottom of the rail. The wheels must be flush with the floor and parallel.

Step 4: Install the Opener

Install the opener onto the rail. The chain sprocket of the opener must face the spring and the rail. If you have a belt drive opener, the belt must be placed in the grooves on the side of the opener. Attach the safety bracket and the lock-off lever to the opener. Make sure all the connections are secure.

Conclusion

Installing a wall-mounted garage door opener is a great way to keep your garage organized. The installation process is not that difficult, and it only takes a few hours. If you’re thinking about installing a wall-mounted opener, read on for detailed instructions and tips.

Reach our technicians right now at (647) 887-7477